Blade 15L
Flow|Debit: 2.69 m3/min
Power|Putere: 15.00 kW
Max. pressure|Presiune max: 8.00 BarG
Speed: fixed
Sound Pressure Level: 67.00 dB(A)
Dimensions|Dimensiuni: 1400x770x1330 mm
Weight|Masa: 560.00 kg
!Dimensions and weight can vary for variants and accessories!
!Dimensiunile şi masa se pot modifica în funcţie de variantă şi accesorii!
!Dimensiunile şi masa se pot modifica în funcţie de variantă şi accesorii!
Type|Tip: Rotary vane
Manufacturer|Fabricant: Mattei
Downloads
Rotary Vane Compressor Operating Principle
Download | Descarcăpdf - 774.79 KB
Mattei Blade Broschure EN
Download | Descarcăpdf - 1.14 MB
Mattei Blade 15-22 Broschure EN
Download | Descarcăpdf - 902.82 KB
Configurator
Integrated Refrigeration Dryer
Integrates a refrigerated dryer into cabinet. Reduces installation costs and space requirements.
Uscător prin răcire integrat.
Heat Recovery
The compression of air always produces heat as a byproduct. Usually, this heat energy dissipates throughout the compressor and, through surface radiation, is lost to the environment. However, Mattei has found a way to recover heat (as warm air) and redistribute it to other parts of the facility.
Heaters Kit | Încălzire
Upgrade for outdoor use - Totaly Enclosed Fan Cooled Motor
Pachet pentru exterior
Condensate drain and separator | Separator de condens
The kit is composed of a condensate separator and a timed electronic drain.
Separator de condens cu timer electronic de evacuare
Maestro Expansion Kit
It allows the remote signaling of on/off controls by means of volt free contacts and hourly programming. If more compressors are connected (max. 4), it allows the sequence management.
Posibilitate de control de la distanţă, programare temporizată şi sincronizare cu alte compresoare.
External Refrigeration Dryer | Uscător prin refrigerare
Refrigeration dryers are based on the principle of condensation by compressed air cooling, through a refrigeration circuit.
Uscătoarele prin refrigerare se bazează pe principiul condensării prin răcire a aerului comprimat.
External Adsorption Dryer | Uscător prin adsorbţie
Desiccant material is used to attracts the water from the compressed air via adsorbtion.
Un materialul deshidratant este folosit pentru a atrage apa din aerul comprimat prin adsorbție.
C4 - Anti-Dust Filter | Filtru anti-praf
C3 - Pre-Filter | Pre-filtru
C2 - Oil-Removing Filter | Filtru de îndepărtare a uleiului
C1 - Oil-Removing Filter | Filtru de îndepărtare a uleiului
CC - Activated Charcoal Filter | Filtru de carbon activ
|
Name/Compay:* Phone:* E-mail:* |
Comment: |
We can deliver complete BEKOMAT electronically level-controlled condensate drains and service kits as well. The BEKOMAT range provides the 12, 13, 14 and 16 standard drains for virtually every application, which are not just the correct solution, rather more also the most suitable low-energy solution. The integrated capacitive sensor for level-controlled condensate discharge helps save energy and enhances efficiency – which is what you would expect from a BEKOMAT.
The regular maintenance was carried out in 2 consecutive years by the team of TUNGS-STAR on an ABC Horizon 1400 compressor at Plastipak Romania SRL in Urlati. The 40 bar PET compressor is powered by a 280 kW motor equipped with VSD. It has 3 stages with 4 horizontally opposed cylinders.
New 15 kW MATTEI compressor was installed next to an old 7.5 kW Mattei compressor to assure the increased production of a local company.