Thick walled bimetallic sliding bearings
Bimetallic thick-walled bearing brass with sliding layer on basis of copper alloys.
Sliding bearings for the working conditions with the hydrodynamic lubrication, suitable for static and dynamic load.
The sliding material is deposited by the casting on the base steel. It has got a universal structure, it is characterised by good sliding characteristics also under the conditions of boundary friction. Normally it is being used with galvanically spread superficial layer of PbSn. The bearings with the lining BS 3332 are not being galvanised. A journal in sliding bedding does not require superficial friction. For the high loaded sliding bedding, the sliding material CuPb22Sn with higher dynamic load is used. Because of its good sliding characteristics, they are applied as the main crank bearings in combustion engines, as the bearings of tool machines etc.
The dimensions of bearings, which are produced by this method:
- minimum diameter: 20 mm
- maximum diameter: 500 mm
- maximal width: 400 mm
| Specifications | MU | B22 | B30 | Bs3332 |
|---|---|---|---|---|
| Chemical composition of sliding layer | CuPb22Sn | CuPb30 | SnSb10Cu3Ni | |
| Elasticity strength | Mpa | 200-250 | 100-150 | 80-100 |
| Tensile strength | Mpa | 90000 | 73000 | 70000 |
| Elongation | % | 2,2-3 | 2-3 | 2,2-3 |
| Hardness HV50 | 45-80 | 30-45 | 28-30 | |
| Max. load at dynamic tension | Mpa | 42 | 32 | 30 |
| Max. operating temperature | oC | 220 | 160 | 110 |
| Tensile strength of steel | Mpa | 400-550 | 400-540 | 400-550 |
| Yield limit of the base steel | Mpa | min. 280 | ||
| Hardness of the base steel | HB | 150 | ||
Staring with October 2019 Our Company officially become the partenr of ABC COMPRESSORS. Arizaga, Bastarrica y Cía, S.A. from Spain.
From now on our company is certified for engineering, sale, installation, commissioning and service for industrial technical equipment which has implemented and maintains a quality management system which fulfills the requirements of the standard 